HP Printer Install Wizard for Windows 7/8/8.1 Description: The HP Printer Install Wizard for Windows was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer. Simply run the tool and follow the on-screen instructions. NOTE: The HP Printer Install Wizard for Windows does not support Windows RT for ARM-based tablets or computers. Installation of additional printing is not required.

• Download Hp Install Network Printer Wizard 7.1

HP recommends that users utilize the print capabilities already included in Windows RT. Fix/Enhancement: This updated version of the HP Printer Install Wizard for Windows adds the following enhancements: Support for Windows 8.1 Additional diagnostic and auto-fix capabilities Support for additional HP printers Release details: Released: 2013-09-30 File name: hppiw.exe Version: 3.1 Compatibility: Microsoft Windows 7 (32-bit) Microsoft Windows 7 (64-bit), Microsoft Windows 8 (32-bit), Microsoft Windows8 Professional (64-bit), Microsoft Windows 8.1 (32-bit), Microsoft Windows 8.1 (64-bit) File Sizze: 2.24Mb.

Setting the IP Address If the printer doesn't have an address, then the Wizard will allow you to change the IP address by selecting the printer from the list and by selecting the 'Configure IP' option. A dialogue box will then appear which allows you to specify information such as the IP address, subnet mask and also the gateway address if necessary. Windows®95/98/Me/NT4 and Windows 2000 systems Different operation systems have different ways of printing. For example, Windows® 95/98 and Windows® Me do not have any built in peer-to-peer printing capability. This means that on a Windows® 9x/Me PC, the Wizard software must also install the Brother peer-to-peer printing software.

Download Hp Install Network Printer Wizard 7.1

However, Windows® NT 4 and Windows® 2000 do include peer-to-peer printing capabilities, in fact, Microsoft® enhanced their peer-to-peer printing support by supporting the Internet Printing Protocol (IPP) on their Windows® 2000 series of software. This means that if you use this software on a Windows® NT 4 or Windows® 2000 system and select the 'LPR (Recommended)' option, the Wizard will use the Microsoft® supplied peer-to-peer printing software and in the case of Windows® 2000, the Wizard will also display the 'IPP' option in the 'Port Driver' setting of the Wizard. After you have specified the correct printer from the list, the Wizard will check which drivers you have installed onto your PC. However, if you don't have the correct printer driver on your PC yet, you must specify another driver. To do that click the 'Have Disk' button and browse through to the correct location that contains the Brother driver that you wish to install. For example, if you are installing a HL-1650/70N driver, the driver you require is located in the driver pcl folder. Once you have specified the correct driver, click the 'Next' button from the 'Select the printer driver' screen.

You will then see a screen similar to below: Please note the two options:. 'Copy the Driver files to this PC and create an installation program for other users'.

This option will install the Brother driver onto your PC and will also create an.EXE file which can be run by other users. When other users run the.EXE file, they will automatically receive the driver and also any peer to peer printing software that may not already be installed on their PC. 'Only create an Installation Program for other users'. Use this option if you have already installed the driver on your PC and simply wish to create an.EXE file that other users can run. Select the option that you require, if you do not wish to create an.EXE file, simply click the 'Finish' button and the driver and peer to peer printing software will only be created on your PC. If you select either of the make.EXE file options, you will be prompted to specify a network share and path that will contain the.EXE file.

Specify a location and let the driver create the.EXE file. The necesarry driver will be installed onto your PC and the necessary peer to peer printing software will also be copied to your PC. On some operating systems you will then have to re-boot your PC before you can print. Once the PC is re-booted you are able to print a test page that confirms that the printer and network connections is OK.

Installing the driver automaticially onto other computers If you selected either of the make.EXE file options, simply inform your colleagues to run the.EXE file you create and automatically the driver and peer to peer printing software will be installed onto their PC.